A furnace breakdown in the middle of a peak winter season is one of the most inconvenient things that can happen to anybody. Besides the inconvenience, furnace breakdowns can also lead to potential health issues. But thankfully, you can prevent a furnace breakdown from derailing your home’s heating requirements. All you need to do is pay attention to the signs of furnace repair we have listed below. Let’s take a look!
Signs That Indicate You Need Furnace Repair
Your Furnace Won't Turn On
If your furnace won’t turn on or it takes multiple attempts to start, try cleaning the filter to see if that works. If it doesn’t, the problem might be with other parts, such as the flame sensor or heat exchanger. The problem might also arise if you have an old furnace that needs replacement. Call an HVAC contractor in Bonney Lake to diagnose and fix the problem.
Pro Tip: To avoid furnace starting issues, ensure regular maintenance of your furnace. Schedule at least one furnace tune-up/service every year; if your furnace is exposed to too much dirt and dust, you can opt for two furnace services yearly.
There's Uneven Heating
One of the most common causes of uneven heating includes clogged air filters, damaged zone control, and inadequate insulation. A duct leak or poorly installed duct is also one of the reasons for uneven heating. Before you call a technician for heating repair in Federal Way, clean or replace the air filter to see if that helps. If it doesn’t, then you need to schedule a furnace inspection.
Note: Although rare, a dying furnace is also one of the causes of uneven heating. So, if your furnace is too old, then furnace repair might not help, and you should stay prepared for a furnace replacement.
There's Been an Unreasonable Rise in Your Energy Bills
Lack of furnace maintenance is one of the most common reasons for rising heating bills. That’s because lack of maintenance leads to the accumulation of dirt, dust, and other pollutants, which reduces system efficiency and increases power consumption. But there could be other reasons, too, such as poor home insulation, duct leaks, and thermostat malfunction. Whatever the reason, let a Bonney Lake HVAC contractor visit and inspect your heating system. And make sure you don’t procrastinate a technician visit, or you might end up paying for costly furnace repairs.
There's a Strange Lingering Odor
During the initial days when the furnace is first installed, you might notice a pungent smell that goes away with time. But if you notice a strange lingering odour at a later stage, it could be caused by a gas leak or poor combustion. Turn off the gas supply immediately and call an HVAC contractor in Bonney Lake and have the furnace inspected. As an extra precaution, you may stay out of the house until the issue is resolved. If you face any issues finding a technician for emergency furnace repair in Auburn, contact us at Rainier Heating & Cooling, and we will send a technician to your place immediately.
The Carbon Monoxide Alarm Goes Off Frequently
A frequent carbon monoxide alert could hint at a serious furnace issue that needs to be addressed on time. Do not ignore this sign, as it could be a possible carbon monoxide leak that can negatively impact your and your family members’ health. Carbon monoxide is a colourless and odourless gas that tends to go unnoticed. But thanks to the carbon monoxide alarm, you get an alert when the deadly air starts leaking. The alarm might sometimes go off because of a malfunction, but that’s rare. In either case, you must call a furnace maintenance in Tacoma, WA, and have your heating system checked.
You Can Hear Strange Furnace Sounds
If you hear a consistent whirring sound from your furnace, it’s a sign of a healthy furnace in good working order. But if you notice any strange sounds from your furnace, such as banging, rattling, clicking, squealing, and thumping, this can indicate something’s wrong with your furnace. For instance, a banging noise is usually caused by a dirty furnace burner or malfunctioning gas vent valve. Similarly, a high-pitched squealing sound may indicate a loose or worn-out belt. Make sure you don’t ignore any furnace noise or wait for them to die down on their own. Instead, call a furnace repair in Puyallup and fix the problem as soon as possible.
These are some of the most common signs of furnace repair that can help you avoid a sudden furnace breakdown and costly furnace repairs. Ensure you inspect your furnace as soon as you notice any of these signs. If you want to schedule a heating repair in Federal Way or furnace maintenance in Tacoma, WA, we at Rainier Heating & Cooling are just a call away. To get in touch, call us at (253) 600-2758 or drop us a line at info@rainierheating.com, and one of our team members will get in touch with you.